'Hydrolevel' Plate Levelling Rolls
- For single pass continuous levelling when incorporating in plate treatment lines prior to shot-blasting and painting
- Sizes from 1.5m wide x 4 mm thick up to 4.5m wide x 75 mm thick at 9m / min at throughput speed
- Auto-control system for minimal operator intervention also manual control for particularly 'difficult' plates
- Minimum/maximum thickness ratio 6:1 (4:1 for Mechanical 7 Roll Machines)
- Can accommodate a range of plate strengths
- Hydraulic force applied directly through fully backed-up main rollers, safe-guarded against overload
- Unit frame construction for strength and rigidity
- All rollers supported on self-aligning, lubricated for life, roller bearings utilising the full drive power
- Automatic adjustment of centre roll settings to minimise the trailing edge effect
- Integral scraper and removal system for automatic scale collection
- Conveyor controls incorporating in operation logic if required
- Over 30 MACHINES supplied worldwide
